|
AST ANTI-SLIP COATINGS
Which Anti-Slip Coating is Right For You?
|
|
Pedestrian
and Light Rolling Traffic
|
Heavy-Duty Vehicular
or Pedestrian with Maximum
Resistance to Chemicals
|
Applying to asphalt?
Try AS-75 |
Need easy to clean?
Try AS-550 |
|
|
|
Wet? Barefoot?
Try AS-175 |
Are Zero-VOC's important?
Try AS-2500 |
 AS-75 |
AS-175 |
AS-550 |
| AS-150 Low V.O.C. |
AS-250
|
AS-2500 |
|
|
|
|
 |
Lumatrax II Anti-Slip Floor
Coating and now, Lumatrax SMC
Safety Marking Coating
Both of these coatings are designed to meet the stringent new ASTM E 2072* Standards for Photoluminescent Safety Markings. This means you get one of the brightest, non-radioactive coatings available today.
|
WHEN SECONDS COUNT, LUMATRAX SHOWS THE WAY OUT
|
|
| PRIMERS AND SEALERS |
| PS-100WB Primer/Sealer |
|
|
Specially formulated to increase adhesion of our coatings on porous floors, such as concrete, wood and tile. Our water-based, low-odor primer/sealer yields a tough, long-lasting surface. |
|
| AP-100 Acrylic Primer |
 |
Use this single-component, clear, zero-VOC, water-based, acrylic primer with our AS-75 anti-slip floor coating and for applications on porous surfaces, wood or concrete. |
|
|
| IMPAX 3300 LV-N Primer |
 |
A clear, high solids, high build, low viscosity primer. Fast curing, low odor, VOC compliant reduces that occur when coating porous substrates. |
|
| MS-7CZ Metal Primer |
 |
This two-part, epoxy-polyamide primer is required prior to application of our anti-slip coatings over metal. It provides maximum adhesion, toughness and corrosion resistance, withstanding even salt and chemical attack. |
|
|
| MS-7CZ LT Primer |
LOW TEMPERATURE CURE TYPE VIII
ANTI CORROSIVE LOW V.O.C. STEEL PRIMER
MS-11CZ LT Surface Primer is a low temperature curing, heavy duty, anti-corrosive modified epoxy primer which forms a tough abrasion resistant film that protects the substrate from salt and chemical attack. Additionally, MS-11CZ LT is a HAPS free primer which contains specially formulated zinc complexes which provide “State of the Art” cathodic protection against corrosion of steel decks on Navy vessels. This unique ability allows MS-11CZ LT to meet the extreme demands of a system in marine environments. MS-11CZ LT provides excellent protection of surfaces against aggressive and corrosive environments.
|
|
| FLOOR PATCH KIT |
| IMPAX 5020 Floor Patch Kit |
Repair concrete with this epoxy-based resurfacing and patching compound, ideally suited for floors exposed to acids, solvents, oils and water. It delivers the toughest floor repairs in the world.
Impax 5020 is a three component, trowelable epoxy surfacing and leveling compound for new or old concrete floors where a high degree of chemical and abrasion resistance is required. The physical properties of Impax 5020 Floor Resurfacer are much greater than concrete. Excellent abrasion and impact resistance recommend it for high traffic areas. Its 100% reactive epoxy formulation conforms to present OSHA and USDA requirements, permitting applications in any food processing facility. This seamless resurfacer provides a barrier to bacterial growth and is designed for use where a sanitary, chemical resistant, anti-skid floor is required.
|
| APPLICATION TOOLS |
|
Application as easy as 1, 2, 3.
Our products are so easy to apply you can do it yourself. For all but the biggest jobs, you don't need a contractor so there is no wasted time and aggravation gathering bids. You can apply it as needed, when it's convenient for you (minimizing down time) or on areas too small to interest a contractor.
It's this simple: First, clean the floor of grease and oil, and patch or prime if necessary. Then mix the contents of the can (cans) thoroughly. Apply with our special phenolic roller—which builds the correct anti-slip profile as you pull it across the surface. Let it dry. You're done!
 The Right Tools for the Job.
Application of these products are made easy with a professional sprayer or specialized easy-to-use rollers available from American Safety Technologies. Our napless, phenolic-resin coated, core roller is essential for creating the correct anti-slip profile. The 9" roller cage is built for rugged use. Our heavy-duty fiberglass extension handle allows you to pull the coating towards you with the correct downward pressure. The stainless-steel mixing blade is indispensable for throughly blending anti-slip coatings.
See the technical data sheets for complete prep & application techniques.
|
|
|
|
|
Product List
|
|
Typical Industries:
Typical Applications:
|
SUPER TECH SUPPORT
Call our technical support hot line for product specifications, MSDS sheets, and answers to all of your technical or application questions.
1-800-631-7841
ITW/American Safety Technologies
130 Commerce Drive
Montgomeryville, PA 18936
|
Don't Let the Surface Floor You
—Safety and Aesthetics
are More Than Options—
According to the National Safety Council, slips and falls are the leading cause of death in the workplace and the source of more than 20 percent of disabling injuries - resulting in more than 1,500 fatalities and more than 564,000 ddisabling injuries annually.
Total Traction
—A New Technology Combats the Number One Killer Without Minimizing Aesthetics—
Flooring and Matting
According to the National Safety Council, slips and falls are the leading cause of death in the workplace and the source of more than 20 percent of all disabling injuries. They result in more than 1,500 fatalities and more than $64,000 disabling injuries annually.
Slips-Falls: A Threat to Safety
Every 18 seconds, a worker is injured on the job according to the National Safety Council's 1989 edition of Accident Facts. Every 50 minutes, one worker dies from a work related injury. Although off-the-job statistics run much higher, today's employers are aware of the negative impact that on-the-job injuries, deaths and accidents have on production and profitability. High medical costs, rising insurance and legal costa and increasing workman's compensation benefits, make safety a major priority in conducting business.
|
|
