| AST ANTI-SLIP COATINGS |
 |
AS-150 Anti-Slip Coating
Because of its single-component formulation you can use this Kevlar®-fortified epoxy straight out of the can as needed and then re-seal for future use. Withstands heavy pedestrian and light rolling traffic, gasoline, fire, oil, salt water, acid, alkali and aliphatic solvents— and it great for floors, ramps, decks, entrances, treads, machine shops and manufacturing facilities.
Available Colors: Gray, Black,
Tile Red, and Safety Yellow.
Prep & Application Technique for AS-150
|
 PS-100 WB Primer/Sealer
Specially formulated to increase adhesion of our coatings on porous floors, such as concrete, wood and tile. Our water-based, low-odor primer/sealer yields a tough, long-lasting surface.
 MS-7CZ Industrial Metal Primer
This two-part, epoxy-polyamide primer is required prior to application of our anti-slip coatings over metal. It provides maximum adhesion, toughness and corrosion resistance, with-standing even salt and chemical attack.
|
 The Right Tools for the Job.
Application of these products are made easy with a professional sprayer or specialized easy-to-use rollers available from American Safety Technologies. Our napless, phenolic-resin coated, core roller is essential for creating the correct anti-slip profile. The 9" roller cage is built for rugged use. Our heavy-duty fiberglass extension handle allows you to pull the coating towards you with the correct downward pressure. The stainless-steel mixing blade is indispensable for throughly blending anti-slip coatings.
See the technical data sheet for complete prep & application techniques.
|
|
-
|
AS-75
|
AS-150
|
AS-175
|
AS-250
|
AS-550
|
AS-2500
|
|
EST. COVERAGE IN SQ. FT./GAL.
|
| Roller |
70
|
50
|
90
|
40
|
30
|
25-35
|
| Trowel |
-
|
40
|
-
|
50
|
45
|
40
|
| Spray |
125
|
60
|
120
|
60
|
60
|
60
|
|
EST. POT LIFE IN HOURS @ 70F (21C)
|
|
-
|
NA
|
NA
|
1
|
4
|
1
|
1
|
|
MEETS OSHA, ADA, ASTM, & MILITARY SPECIFICATIONS
|
| Y=Yes |
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
|
EST. DRY TIME IN HOURS @ 70F (21C)
|
| Light Traffic |
3-4
|
12
|
24
|
12
|
12
|
24
|
| Heavy Traffic |
24
|
72
|
72
|
72
|
24
|
48
|
|
VOC VOLUMES
|
| Pounds/Gallon |
0.34
|
2.08
|
.5
|
2.08
|
0.6
|
0
|
| Grams/Liter |
42
|
250
|
60
|
250
|
80
|
0
|
| % Solids |
68
|
61
|
63
|
71
|
89
|
100
|
|
COEFFICIENT OF FRICTION (ADA MIN.=.6)
|
| Dry |
1.3
|
1.17
|
0.78
|
1.05
|
0.88
|
1.1
|
| Wet |
0.9
|
1.0
|
0.86
|
1.05
|
0.93
|
1.0
|
|
AVAILABLE COLORS
|
| Gray |
X
|
X
|
-
|
X
|
X
|
X
|
| Light Gray |
-
|
-
|
X
|
-
|
-
|
-
|
| Black |
X
|
X
|
X
|
X
|
X
|
X
|
| Beige |
-
|
-
|
X
|
-
|
-
|
-
|
| Tile Red |
X
|
X
|
X
|
X
|
X
|
X
|
|
Safety Yellow
|
X
|
X
|
X
|
X
|
X
|
X
|
|
|
|
Product List
|
WHEN SECONDS COUNT,
LUMATRAX SHOWS THE WAY OUT
Lumatrax II Anti-Slip Floor Coating
and now, Lumatrax SMC Safety Marking Coating
 Both of these coatings are designed to meet the stringent new ASTM E 2072* Standards for Photoluminescent Safety Markings. This means you get one of the brightest, non-radioactive coatings available today.
SUPER TECH SUPPORT
Call our technical support hot line for product specifications, MSDS sheets, and answers to all of your technical or application questions.
1-800-631-7841
ITW/American Safety Technologies
130 Commerce Drive
Montgomeryville, PA 18936
|
|
|
Tough Customers
Call for Tough Solutions.
 NASA'S ENGINEERS GET AN ENGINEERED SOLUTION.
NASA’s Vehicle Assembly Building is the immense “clean room” where the space shuttle is built. Obviously, sand-in-paint wouldn’t meet NASA’s high-tech standards. In fact, NASA’s requirements for the anti slip coating to cover the Vehicle Assembly Building’s galvanized steel floors and walkways were so stringent and state-of-the art that the right coating did not exist—until we created it. Everyone agrees it’s out of this world.
|
|
