| AST ANTI-SLIP COATINGS |
 |
AS-150 Low V.O.C. Anti-Slip Coating
AS-150 Low V.O.C. is a single component, epoxy ester non-slip floor and deck coating designed for application in areas of heavy pedestrian grade traffic. This light duty safety coating is both easy and fast to apply and offers optimum adhesion to metal concrete and wood surfaces with the appropriate primer. AS-150 Low V.O.C. is usable after two years in storage in unopened containers. A partially used container may be resealed and saved for future use. AS-150 Low V.O.C. is fire retardant in the cured state. It resists gasoline, oil, acids, alkaline and aliphatic solvents.
Available Colors: Gray, Black,
Tile Red, Safety Yellow and two tint bases.
|
| Prep & Application Technique for AS-150 |
 |
PS-100 WB Primer/Sealer
Specially formulated to increase adhesion of our coatings on porous floors, such as concrete, wood and tile. Our water-based, low-odor primer/sealer yields a tough, long-lasting surface.
|
MS-7CZ Metal Primer
This two-part, epoxy-polyamide primer is required prior to application of our anti-slip coatings over metal. It provides maximum adhesion, toughness and corrosion resistance, with-standing even salt and chemical attack.
|
 |
|
 The Right Tools for the Job.
Application of these products is made easy with a speciality sprayer or specialized easy-to-use rollers available from American Safety Technologies. Our napless, phenolic-resin coated, core roller is essential for creating the correct anti-slip profile. The 9" roller cage is built for rugged use. Our heavy-duty fiberglass extension handle allows you to pull the coating towards you with the correct downward pressure. The stainless-steel mixing blade is indispensable for thoroughly blending anti-slip coatings.
See the technical data sheet for complete prep & application techniques.
|
| AS-150 Low V.O.C. |
|
VOC
|
2.08 lbs. per gal.
(250 grams/liter)
|
|
EST. COVERAGE IN SQ. FT./GAL.
|
| Roller |
50
|
| Trowel |
40
|
| Spray |
60
|
|
EST. POT LIFE IN HOURS @ 70F (21C)
|
|
-
|
NA
|
|
MEETS OSHA, ADA, ASTM, & MILITARY SPECIFICATIONS
|
| Y=Yes |
Y
|
|
EST. DRY TIME IN HOURS @ 70F (21C)
|
| Light Traffic |
12 hours
|
| Heavy Traffic |
72 hours
|
|
VOC VOLUMES
|
| % Solids |
61
|
|
COEFFICIENT OF FRICTION ASTM F609
|
| Dry |
1.17
|
| Wet |
1.00
|
|
AVAILABLE COLORS
|
| Gray |
X
|
| Light Gray |
-
|
| Black |
X
|
| Beige |
-
|
| Tile Red |
X
|
|
Safety Yellow
|
X
|
| Two Tint Bases |
X |
|
|
|
Product List
|
EASY TO APPLY.
EASY TO CLEAN.
AST Coatings are just as easy to apply as paint. Simply roll onto a clean, dry, uncontaminated floor. Most of our coatings are ready for light traffic in 12-24 hours, heavy traffic in just 48 hours. AST Anti-Slip Coatings are easy to clean, too. They meet the ASTM D-3450 test for washability and easy clean-up. Just sweep, hose off, or run a scrubbing machine over the surface with the cleaning solution of your choice.
SUPER TECH SUPPORT
Call our technical support hot line for product specifications, MSDS sheets, and answers to all of your technical or application questions.
1-800-631-7841
ITW/American Safety Technologies
130 Commerce Drive
Montgomeryville, PA 18936
|
|
|
Tough Customers
Call for Tough Solutions.
 NASA'S ENGINEERS GET AN ENGINEERED SOLUTION.
NASA’s Vehicle Assembly Building is the immense “clean room” where the space shuttle is built. Obviously, sand-in-paint wouldn’t meet NASA’s high-tech standards. In fact, NASA’s requirements for the anti slip coating to cover the Vehicle Assembly Building’s galvanized steel floors and walkways were so stringent and state-of-the art that the right coating did not exist—until we created it. Everyone agrees it’s out of this world.
|
|
