| AST ANTI-SLIP COATINGS |
 |
IMPAX 3300 LV-N Primer
HIGH SOLIDS, CLEAR EPOXY PRIMER
A clear, high solids, high build, low viscosity primer designed for use with clear finish coats or any of the DecoBlend systems.
- Fast curing, penetrating primer
- Low odor, VOC compliant
- High build for use over mechanically prepared substrates (i.e. shot-blast)
- Reduces bubbling and pinholes that occur when coating porous substrates
|
|
See the technical data sheet for complete prep & application techniques.
|
| IMPAX 3300 LV-N PRIMER |
| Color |
Clear |
| Gloss |
Full Gloss |
| Volume Solids |
96% |
| V.O.C. |
<0.2 lbs./gal. (<25 gr/ltr)
|
| Coverage
|
200 sq. ft./gal @ 7 to 9 mils WFT/DFT
|
|
Packaging
|
1 gal. unit containing 1 gal. can (slack-filled) resin, 1/2 gal. can (slack-filled) hardener (3.7 liters unit vol.) 5 gal. unit containing 5 gal. can (slack-filled) resin, 1-1/2 gal plastic jug hardener (18 liters unit vol.)
|
| Application Temperatures |
55°F minimum to 95°F maximum (12°C minimum to 35°C maximum) *Must be 5°F above dew point
|
| Relative Humidity |
85% maximum
|
|
Serviceability
|
Recoat - 8 hours min. @ 72°F (22°C) @50%RH
36 hours maximum @ 72°F (22°C) @50%RH
|
|
Mixing Ratio
|
3 to 1.7 parts epoxy resin/hardner by volume |
|
Induction
|
None
|
| Pot Life |
40 min. @ 72°F (22°C)
|
| Flash point |
200°+F (93°+C) |
| Viscosity |
480 cps @ 72°F (22°C) |
| Clean Up |
IMPAX IXT 59 Solvent |
| Service Temperature |
180°F (82°C) Dry HEat Resistance |
| Shelf Life |
18 months in closed container stored @ 50° to 90°F (10° to 32°C) |
|
|
|
Product List
|
WHEN SECONDS COUNT,
LUMATRAX SHOWS THE WAY OUT
Lumatrax II Anti-Slip Floor Coating
and now, Lumatrax SMC Safety Marking Coating
 Both of these coatings are designed to meet the stringent new ASTM E 2072* Standards for Photoluminescent Safety Markings. This means you get one of the brightest, non-radioactive coatings available today.
SUPER TECH SUPPORT
Call our technical support hot line for product specifications, MSDS sheets, and answers to all of your technical or application questions.
1-800-631-7841
ITW/American Safety Technologies
130 Commerce Drive
Montgomeryville, PA 18936
|
|
|
|
